Help & Advice

Our experts are on hand to guide you to the right solutions

> Click for support

L-band Splitter active 8-way with variable gain & 10MHz pass


  • Description

    ETL Model D0108S1ULA-22389, active 8-way L-band (850-2150MHz) Splitter with 0-20 dB variable gain, switchable (on/off) 18V LNB powering and 10 MHz pass. 10MHz will pass from output port 1 to input port, and can also be injected via the 10MHz input port.

    The variable gain amplifier is accessible from the front panel for ease of use. A DIL switch is available on the front panel and allows the gain level to be set and for the LNB power to be switched on/off.

    The unit is powered by dual redundant power supplies for reliability in service, and can be monitored externally via alarm contacts.

    It is housed in a 1U high x 350mm deep x 19" wide rack mountable shelf and is available in the impedances and connector types shown below.

Title Model No. Datasheets
50 ohm SMA
50 ohm N-type
50 ohm BNC