Help & Advice

Our experts are on hand to guide you to the right solutions

> Click for support

26128 Modular L-band Splitter active 4-way with low noise - MULTI

26128-DIV430

  • Description

    Model 26128-DIV430-XXXX, is an L-band (850-2150MHz) active 4-way splitter module card with low noise (7 dB), 1 dB fixed gain and slope compensation, RF detection and 13/18V LNB powering with 22kHz tone.

    It is designed to be housed in a Model 26128 modular system chassis, which holds up to 16 splitter modules. The chassis benefits from hot-swap RF cards, dual redundant hot-swap power supplies for reliability in service and a hot-swap CPU module.

    Remote control and monitoring is via RJ45 Ethernet port with SNMP and web browser interface.

    The modular system chassis can hold a mix of RF cards including splitters, combiners, amplifiers, switches and attenuators, providing flexible signal management in a compact housing.

    The chassis is 4U high x 450mm deep x 19" wide shelf and is available in the impedances and connector types shown below.

4-way Active L-band Splitter with fixed gain, slope, RF detection & LNB power - for Modular System
4-way Active L-band Splitter with fixed gain, slope, RF detection & LNB power - for Modular System
4-way Active L-band Splitter with fixed gain, slope, RF detection & LNB power - for Modular System
4-way Active L-band Splitter with fixed gain, slope, RF detection & LNB power - for Modular System
Need Something Customised?
Connector Type Model No. Datasheets
50 ohm BNC
26128-DIV430-B5B5
Enquire
75 ohm BNC
26128-DIV430-B7B7
Enquire
75 ohm F-type
26128-DIV430-F7F7
Enquire
50 ohm SMA
26128-DIV430-S5S5
Enquire

Associated Products