Help & Advice

Our experts are on hand to guide you to the right solutions

> Click for support

StingRay100 CWDM AGC Broadband Receive Fibre Converter

SRY-RX-B2-144

  • Description

    Model SRY-RX-B2-144, 100 series CWDM (coarse wavelength division multiplexing) StingRay RF over Fibre module is designed to provide compact fibre links up to 50 km, with eight wavelengths on a single fibre cable. 

    It is a RECEIVE module that converts an optical signal to BROADBAND (50-2450MHz).

    The modules has AGC (Automatic Gain Control) with automatic link optimisation for FAST SET-UP.

    It is designed to be housed in a 100 series indoor chassis & work with ETL's transmit modules SRY-TxxB2-143.

    The StingRay RF over Fibre module is available in a variety of RF connector and optical connector types. See below for related modules and chassis.

  • CWDM System

    The StingRay CWDM system comprises of transmit RF over fibre modules and a multiplexer module to combine up to 8 wavelengths on to a single fibre cable at the transmit end.

    A demultiplexer module and receive RF over fibre modules are then used at the receive end to split the separate wavelengths. The StingRay series CWDM range of RF over fibre modules can convert L-band (850 MHz - 2450 MHz) and Broadband (50 MHz - 2450 MHz) frequencies up to 50km transmission distances.

     

     

     

  • Fibre Connectors

    Optical fibre connectors are used to terminate the end of an optical fibre cable and enables quick connection.

    Angle Polished Connectors
    All of the connectors we offer are APC connectors (Angled Physical Contact). APC connectors are used as they provide extremely reliable way of achieving the high return losses essential in RF systems.
    APC connectors have the fibre end face polished at an 8-degree angle to prevent light that reflects from the interface from traveling back up the fibre.


    Due to the angle of the connector, the reflected light does not stay in the fibre core/cladding but instead leaks out into the cladding. APC connector return loss is around -60 dB.

    We offer 2 optical fibre connector types that offer low loss and create an extremely reliable connection:

    FC/APC (Angled ferrule connector / fibre connector).
    Ferrule diameter: 2.5 mm
    Coupling type: screw



    SC/APC (Angled subscriber connector / square connector / standard connector).
    Ferrule diameter: 2.5 mm
    Coupling type: Snap (push-pull coupling)

Connector Type Model No. Datasheets
50 ohm BNC (RF), FC/APC (optic)
SRY-RX-B2-144-B5FA
Enquire
50 ohm BNC (RF), SC/APC (optic)
SRY-RX-B2-144-B5SA
Enquire
75 ohm BNC (RF), FC/APC (optic)
SRY-RX-B2-144-B7FA
Enquire
75 ohm BNC (RF), SC/ACP (optic)
SRY-RX-B2-144-B7SA
Enquire
75 ohm F-type (RF), FC/APC (optic)
SRY-RX-B2-144-F7FA
Enquire
75 ohm F-type (RF), SC/APC (optic)
SRY-RX-B2-144-F7SA
Enquire
50 ohm SMA (RF), FC/APC (optic)
SRY-RX-B2-144-S5FA
Enquire
50 ohm SMA (RF), SC/APC (optic)
SRY-RX-B2-144-S5SA
Enquire