Help & Advice

Our experts are on hand to guide you to the right solutions

> Click for support

Griffin Redundancy Switch Module Optical 2x1

GRF-202-XXXXXX

  • Description

    Model GRF-202 is a 2 x 1 1240-1640nm optical wavelength optical Redundancy Switch module. The module is a latching relay switch and works on single mode fibre. It is also designed to be housed in the 1U high Griffin GRF-C900-1U chassis, with 2 module slots for multiple configurations.

    Switch modules can be switched independently (individual mode) or together (simultaneous mode). Switching may be triggered by front panel, RF level detection alarm contacts or NMS. When operating in Auto mode, modules with RF level detection will switch from main to standby on detection of a fault on the main. Switch back to the main path is configurable. The default setting is for the unit to latch to the standby path and not automatically switch back to the main path if the RF signal is restored.

    The chassis features dual redundant PSUs and hot-swap switch modules. For the compatible products, please see below.

Title Model No. Datasheets
SC-APC
GRF-202-SASASA
Enquire
FC-APC
GRF-202-FAFAFA
Enquire