Help & Advice

Our experts are on hand to guide you to the right solutions

> Click for support

Griffin Redundancy Switch Module L-band 2x1

GRF-050-XXXX

  • Description

    Model GRF-050 is a 2 x 1 DC-2450 MHz L-Band Redundancy Switch module. The module is designed to be housed in the 1U high Griffin GRF-C900-1U chassis, with 2 module slots for multiple configurations.

    Switch modules can be switched independently (individual mode) or together (simultaneous mode). Switching may be triggered by front panel, RF level detection, alarm contacts or NMS. When operating in Auto mode, modules with RF level detection will switch from main to standby on detection of a fault on the main. Switch back to the main path is configurable. The default setting is for the unit to latch to the standby path and not automatically switch back to the main path if the RF signal is restored.

    The chassis features dual redundant PSUs and hot-swap switch modules. For the compatible products, please see below.

Title Model No. Datasheets
50 Ohm BNC
GRF-050-B5B5
Enquire
75 Ohm BNC
GRF-050-B7B7
Enquire
50 Ohm SMA
GRF-050-S5S5
Enquire
75 Ohm F-Type
GRF-050-F7F7
Enquire
50 Ohm N-Type
GRF-050-N5N5
Enquire