Help & Advice

Our experts are on hand to guide you to the right solutions

> Click for support

Redundancy Switch L-band (LNB / antenna) with auto switchover 2 x 1

26128-SW103

  • Description

    Model 26128-SW103-XXXX, is an L-band (850-2150MHz) 2x1 LNB redundancy switch module card. It benefits from fixed gain and fixed slope compensation, with 0/13/18V LNB powering and 22kHz tone. Autoswitchover is based on RF signal level detection.

    It is designed to be housed in a  Model 26128 modular system chassis, which holds up to 16 switch modules. The chassis benefits from hot-swap RF cards, dual redundant hot-swap power supplies for reliability in service and a hot-swap CPU module.

    Remote control and monitoring is via RJ45 Ethernet port with SNMP and web browser interface.

    The modular system chassis can hold a mix of RF cards including splitters, combiners, amplifiers and attenuators, providing flexible signal management in a compact housing.

    The chassis is 4U high x 450mm deep x 19" wide shelf and is available in the impedances and connector types shown below.

Title Model No. Price Datasheets
50 ohm BNC
26128-SW103-B5B5
POA
Enquire
50 ohm SMA
26128-SW103-S5S5
POA
Enquire
75 ohm BNC
26128-SW103-B7B7
POA
Enquire
75 ohm F-type
26128-SW103-F7F7
POA
Enquire

Associated Products