Help & Advice

Our experts are on hand to guide you to the right solutions

> Click for support

Redundancy Switch L-band (LNB / antenna) with auto switchover 2 x 1

26128-SW103

  • Description

    Model 26128-SW103-XXXX, is an L-band (850-2150MHz) 2x1 LNB redundancy switch module card. It benefits from fixed gain and fixed slope compensation, with 0/13/18V LNB powering and 22kHz tone. Autoswitchover is based on RF signal level detection.

    It is designed to be housed in a  Model 26128 modular system chassis, which holds up to 16 switch modules. The chassis benefits from hot-swap RF cards, dual redundant hot-swap power supplies for reliability in service and a hot-swap CPU module.

    Remote control and monitoring is via RJ45 Ethernet port with SNMP and web browser interface.

    The modular system chassis can hold a mix of RF cards including splitters, combiners, amplifiers and attenuators, providing flexible signal management in a compact housing.

    The chassis is 4U high x 450mm deep x 19" wide shelf and is available in the impedances and connector types shown below.

Connector Type Price Datasheets
50 ohm BNC
POA
Enquire
50 ohm SMA
POA
Enquire
75 ohm BNC
POA
Enquire
75 ohm F-type
POA
Enquire

Associated Products