NSN-11DescriptionThe Ensign Matrix operates over the 850 -2450MHz frequency range and is both Fan-In and Fan-Out (FIFO), which means that multiple inputs can be combined and the combined signal can then be routed (distributed) to multiple outputs. This is typically to allow modems access to multiple uplink chains, but it can also be used as a Transmit and Receive matrix for smaller teleports or ground stations.A range of RF connectors and impedances are available, including BNC, Ftype and SMA in 50 Ω or 75 Ω. Model numbers will vary.BenefitsKey Benefits:- 32 x 32 fan-in and fan-out routing in a compact 6U high chassis.- Input and output cards can be expanded in single steps.- Further expansion of RF Matrix to 512 x 512 - Continuous monitoring and reporting of all active components (e.g amplifiers).- Reliability in service with hot-swappable active components.- All settings are retained after a communications / power failure.ApplicationTypical Applications:- MEO / LEO uplink chains- Downlink and uplink applications for smaller teleport. Matrix TypeNon-blocking: this means any input can be routed to any output.Full Fan-in - Fan-out (FIFO): multiple inputs can be combined and the combined signal can then be routed (distributed) to multiple outputs.In general, our solid state (L-band) matrices are non-blocking.Matrix SizeThe Ensign Matrix has a full capacity of 32 inputs x 32 outputs, but can be supplied part-populated in single input / output increments - such as 15x25 or 32x16. It can then be hot expanded to 32x32. Larger systems can be made using multiple (Enigma) modules with system splitters and / or combiners – such as 32x64 or 32x128 up to a maximum of 512x512. Title SKU Price Datasheets 50 ohm BNC NSN-11-B5B5 POA Quote Request 75 ohm BNC NSN-11-B7B7 POA Quote Request 75 ohm F-type NSN-11-F7F7 POA Quote Request 50 ohm SMA NSN-11-S5S5 POA Quote Request Need Something Customised?