Help & Advice

Our experts are on hand to guide you to the right solutions

> Click for support

PIRANHA LNB Power Inserter Module with 10MHz injection


  • Description

    Model PRN-L106-xxxx, Piranha series LNB DC Power Inserter module with selectable 0/13/18V LNB powering and 22kHz tone and 10MHz injection on to port 1 is switchable on/off when housed in the 10MHz chassis (Model PRN-15). The Power Inserter module is designed to be housed in ETL's up to 16 port LNB Power Inserter Piranha Chassis, PRN-10 or PRN-15.

    ENERGY EFFICIENT CONSUMPTION - with SMART load monitoring from 100W, 200W & 500W power supply module options

    RESILIENCE - Hot swap power inserter module

    CONTROL & MONITORING - LNB current and RF power in monitoring of the module is possible locally via push buttons on the front panel and remotely via an Ethernet port on the rear panel of the chassis which it is housed in.

    For the relevant datasheet, please choose a chassis PRN-10 or PRN-15 below.

Connector Type Model No. Price Datasheets
50 ohm BNC
Quote Request
75 ohm BNC
Quote Request
75 ohm F-type
Quote Request
50 ohm SMA
Quote Request