Skip to main content
2x1 L-band Redundancy Switch - for Modular System 2x1 L-band Redundancy Switch - for Modular System 2x1 L-band Redundancy Switch - for Modular System
2x1 L-band Redundancy Switch - for Modular System
2x1 L-band Redundancy Switch - for Modular System
2x1 L-band Redundancy Switch - for Modular System
 
 

2x1 L-band Redundancy Switch - for Modular System

Model 26128-SW103-XXXX, is an L-band (850-2150MHz) 2x1 LNB redundancy switch card. It benefits from fixed gain and fixed slope compensation, with 0/13/18V LNB powering and 22kHz tone. Autoswitchover is based on RF signal level detection.

It is designed to be housed in a Model 26128 modular system chassis, which holds up to 16 switch modules. The chassis benefits from hot-swap RF cards, dual redundant hot-swap power supplies for reliability in service and a hot-swap CPU module.

Remote control and monitoring is via RJ45 Ethernet port with SNMP and web browser interface.

The chassis is 4U high x 450mm deep x 19" wide shelf and is available in the impedances and connector types shown below.

The modular system chassis can hold a mix of RF cards including splitters, combiners, amplifiers and attenuators, providing flexible signal management in a compact housing.

Select connector type...