L-band Splitter 4-way DC Injection

Overview

ETL's range of 4-way L-band active splitters with DC Injection is shown below. All units are provided with 50Ω or 75Ω impedances and various connector types.

All active splitters have an integrated regulator for protection against supply rail fluctuations and are powered either by external or inline DC bias. The input voltage range is typically 8-18V, although this may vary for certain products.

Please click on an image below for immediate pricing and ordering.

Products available in the L-band Splitter 4-way DC Injection range...

L-band Splitter 4-way model: DIV04L1A-2325

L-band Splitter - Active 4-way with unity gain and flat frequency response. Requires an 8-18V external DC bias

L-band Splitter 4-way model: DIV04L1A-2331

L-band Splitter - Active 4-way with unity gain, LNB bias, DC block on all ports and provision for DC input from dual bias lines. Requires an 8-18V external DC bias

L-band Splitter 4-way model: DIV04L1A-2343

L-band Splitter - Active 4-way with unity gain, flat frequency response, DC block on all ports and LNB bias on common port. Requires an 8-18V external DC bias

L-band Splitter 4-way model: DIV04L1A-2351

L-band Splitter - Active 4-way with unity gain, flat frequency response, 10MHz pass on outer 2 output ports only and DC block on all ports. With LNB injection. Requires a 9V external DC bias