L-band Splitter 2-way 10MHz / DC Pass

Overview

ETL's range of 2-way L-band active splitters with 10MHz/DC Pass is shown below. All units are provided with 50Ω or 75Ω impedances and various connector types.

All active splitters have an integrated regulator for protection against supply rail fluctuations and are powered either by external or inline DC bias. The input voltage range is typically 8-18V, although this may vary for certain products.

Please click on an image below for immediate pricing and ordering.

Products available in the L-band Splitter 2-way 10MHz / DC Pass range...

L-band Splitter 2-way model: DIV02L1A-2369

L-band Splitter - Active 2-way with 6dB flat gain and 10MHz/DC pass on one port only. It requires 8-18V external DC bias

L-band Splitter 2-way model: DIV02L1A-2372

L-band Splitter - Active 2-way with 10dB gain, flat frequency response and DC pass on one port only. It requires 8-18V external DC bias

L-band Splitter 2-way model: DIV02L1A-2374

L-band Splitter - Active 2-way with 4-6dB gain, flat frequency response and DC pass on one port only. It requires 8-18V external DC bias.

L-band Splitter 2-way model: DIV02L1A-2423

L-band Splitter - Active 2-way with 10dB gain and 5dB positive slope and DC pass on one port only. It requires 8-18V in line DC bias.