|
|
ETL's range of 8-way L-band active combiners with 10MHz/DC Pass is shown below. All units are provided with 50Ω or 75Ω impedances and various connector types.
All active combiners have an integrated regulator for protection against supply rail fluctuations and are powered either by external or inline DC bias. The input voltage range is typically 8-18V, although this may vary for certain products.
Please click on an image below for immediate pricing and ordering.
L-band Combiner - Active 8-way with unity gain and DC pass on one output port only. Requires 8-18V external DC bias.
L-band Combiner - Active 8-way with unity gain, flat frequency response and DC pass on all ports. With integrated regulator. Requires 9-26V external DC bias.
L-band Combiner. Active 8-way with unity gain and 10MHz/DC pass directional from ports 1 to 8 to the common port. DC is blocked between all input ports. Requires 8-24V external DC bias.
L-band Combiner - Active 8-way with unity gain and 10MHz pass on all ports. DC pass on one output port only. Requires 8-18V external DC bias.
L-band Combiner - Active 8-way with unity gain, 10MHz pass on port 1 and DC block on all ports. With integrated 5V regulator. Requires 8-18V external DC bias.
L-band Combiner - Active 8-way with unity gain. 10MHz/DC pass on port 1 and 10MHz/DC block on all other output ports. With LNB injection on the common port. Requires 8-18V external DC bias.
L-band Combiner - Active 8-way with unity gain, 10MHz/DC pass on port 1 and 10MHz/DC block on all other output ports. Requires 8-18V external DC bias.
L-band Combiner - Active 8-way with 10MHz/DC pass on port 1 and DC block on all other output ports. Requires 8-18V external DC bias via filter-con.
L-band Combiner - Active 8-way with 10MHz pass on port 1 and DC block on all ports. Requires 8-18V external DC bias via filter-con.