RF Switch -

RF Switches, L-Band Switches

Overview: ETL has an RF switch for most applications, with our broadband switches covering from DC to 18GHz and switches available up to 40 GHz. The RF switches can be solid state or relay based. The L-band switch is commonly used in satellite ground stations. This and our C-band switch and Ku-band switch can be used with the ETL carrier monitoring solution. Our RF switches can be locally and / or remotely controlled and most have alarm outputs.

Our range is outlined below:

Model Number	Description	Capacity	Band	Switch Type	Local or Remote Control	RF Ports	Z (ohm)	Isolation (typical)
! NEW 23116	2:1 L-band redundancy switch with RF detection and auto switchover. For IF see 23157.	2x1	L-Band	Solid State	Both	BNC	50	50 dB
! NEW 23157	2:1 IF redundancy switch with RF detection and auto switchover. For L-band see 23116.	2x1	IF	Solid State	Both	BNC	50	50 dB
16 x 1 IF through L-band Switches - Summary Data Sheet	16 x 1 IF through L-band switches covering a wide range of power and control configurations.	16x1	Broadband	Solid State	Both	SMA	50	60 dB
23112	DC to 18 GHz switch, with rotary selector. 2U 19" shelf.	6x1	SHF	Relay	Both	SMA	50	60 dB
23113	SHF Solid State switch with remote control only for use in carrier monitoring applications in conjunction with EL's Carrier Plus CM software. 1U 19" shelf.	4x1	SHF	Solid State	Remote	SMA	50	40 dB
23115	Solid State switch with local & remote control via RS485 (or RS232), 850 - 2150 MHz operating range. Single power supplies. 1U high 19" shelf.	4x1	L-Band	Solid State	Local	BNC	50	40 dB
23124-S5	Broadband Switch for carrier monitoring or general switching, 50 - 2150 MHz operating range, single power supply. 2U high 19" shelf. Requires remote control by model 23125-S5. Local control version also available.	32x1	Broadband	Solid State	Remote	SMA	50	40 dB
23125-S5	Broadband Switch controller for remote control of multiple solid state switches (max 4) such as ETL model 23124-S5 to make a 128x1 switch for routing to analyser or receiver.	128x1	Broadband	Solid State	Both	SMA	50	40 dB
23127	8x1 Solid State IF/ L-band switch with local and remote control for operation at 50 to 2150 MHz. 1U 19" shelf.	8x1	Broadband	Solid State	Both	BNC	50	60 dB
23128	4 x 1 Solid State IF through L-band RF switch with local (push button) and RJ45 remote control for operation between 50 MHz and 2150 MHz. 1U 19" shelf.	4x1	Broadband	Solid State	Both	BNC	50	60 dB
23130 - B5	32 x 1 Broadband monitoring switch with local and remote control for linking into Monitoring & Contol systems. Includes dual redundant power supplies and PSU alarm in a 19" 2U rack.	32x1	Broadband	Solid State	Both	BNC	50	50 dB
23132-S5	16x1 Solid State L-band switch offering an input power of up to +35dBm. Local and remote control in a 2U shelf.	16x1	L-Band	Solid State	Both	SMA	50	40 dB
23133-N5N5	8 x 1 L-band/IF switch with dual power supplies, covering 50 - 2150 Mhz and control via push buttons on front panel or via RJ45 ethernet.	8x1	Broadband	Solid State	Both	N-type	50	60 dB
23145-B5	16 x 1 IF through L-band switch with remote control via RJ45 ethernet port (but a serial port option is available). 2U HIGH.	16x1	Broadband	Solid State	Remote	BNC	50	60 dB
23145-S5	16 x 1IF through L-band switch with remote control via RJ45 ethernet port (but a serial port option is available). 1U HIGH.	16x1	Broadband	Relay	Remote	SMA	50	50 dB
23147-B5	16 x 1 IF through L-band switch with remote control via a RS232 / 485 serial port (but a ethernet port option is available). 2U HIGH.	16x1	Broadband	Solid State	Remote	BNC	50	50 dB
23153	2:1 redundancy switch - IF through L-band with external dry contact alarm from modem triggering switching.	2x1	Broadband	Relay	Both	BNC	50	40 dB
23154-B7	16 Channel 2:1 L Band switch with local and remote control in a 19" 3U shelf.	2x1	L-Band	Solid State	Both	BNC	75	60 dB
23158	32 x 1 SHF Switch, DC to 22 GHz operating range, with local and remote control. Dual PSU.	32x1	SHF	Relay	Both	SMA	50	60 dB
23159	16 x 1 Solid State IF/L-band Switch covering 50 to 2150 MHz, with local and remote control. Single alarmed PSU.	16x1	Broadband	Solid State	Both	SMA	50	50 dB
23160	12 x 1 SHF Switch, DC to 22 GHz operating range with local and remote control. Dual PSU.	12x1	SHF	Relay	Both	SMA	50	60 dB
23161	L-band Switch controller for remote control of up to 8 off 32x1 switch modules, such as ETL model 23124-S5, to make a 256x1 switch.	256x1	L-Band	Solid State	Both	SMA	50	40 dB
23162	16 x 1 Solid State IF/L-band Switch covering 50 to 2150 MHz, with local and remote control (ethernet). Single alarmed PSU.	16x1	Broadband	Solid State	Both	SMA	50	50 dB
23163	Broadband switch, DC-18 GHz operating range, local and ethernet remote control. Single PSU. 1U high19" shelf.	4x1	SHF	Relay	Both	SMA	50	60 dB
23164-S5	8 x 1 IF through L-band switch with remote control via RJ45 ethernet port (but a serial port option is available). 1U HIGH.	8x1	Broadband	Solid State	Remote	SMA	50	50 dB
23165-N5N5	SHF switch, DC-12 GHz operating range, local and RS 232/485 remote control (ethernet control is available as an option). Single PSU. 2U high19" shelf.	8x1	SHF	Relay	Both	N-type	50	80 dB
23165-S5S5	SHF switch, DC-18 GHz operating range, local and RS 232/485 remote control (ethernet control is available as an option). Single PSU. 2U high19" shelf.	8x1	SHF	Relay	Both	SMA	50	60 dB
2321	Switch, 850 - 2150 MHz operating range, single power supply. 1U high 19" shelf.	2x1	L-Band	Solid State	Both	N-type	50	40 dB
2324	Broadband switch, DC-18 GHz operating range, local control only (for RS 232 remote control also see model 2325). Single PSU. 1U high19" shelf.	8x1	SHF	Relay	Both	SMA	50	60 dB
32 x 1 IF through L-band Switches - Summary Data Sheet	32 x 1 IF through L-band switches and controllers - expandable up to 128x1, covering wide range of power and control configurations.	32x1	Broadband	Solid State	Both	SMA	50	50 dB