ETL has developed its range of LNB power supplies
to meet various customer requirements. The LNB PSU can be a simple single voltage
supply via RF loop-through, through to switchable voltage and 22KHz tone for
quad LNB’s. Analogue monitoring
of voltage and current is also available, and typically units would have individually
fused outputs, dual redundant internal PSU’s (often hot swap), and alarm
outputs for PSU failure. The LNB power supply can either have loop through or
external DC injection via a separate injection panel.
ETL also have a number of stand-alone PSU’s for powering the larger
matrix systems and for example active splitter systems requiring stand-alone
hot swap power supplies.
| Model Number |
Description |
Capacity |
Type |
DC Injection |
Dual Voltage |
Hot Swap PSU |
Ports |
Z (ohm) |
  |
|
|
|
|
|
|
|
|
|
! NEW 2764-B7 |
LNB Power Supply Unit, REMOTE & LOCAL SWITCHABLE 0V/13V / 18V, and also 22 KHz tone on and off; fused outputs. 75 ohm F-type connectors IN and 75 ohm BNC connectors OUT. 3U high 19" shelf |
16-port |
LNB |
Internal |
Yes |
Yes |
BNC |
75 |
|
2002 |
4 channel 4-way distribution amplifier (DA), 850 - 2150 MHz operating range, with adjustable gain to 18 dB. LNB Powering on each channel. Monitoring and alarms on voltages, amplifier and LNB currents. RS485 port for alarms. N-type 50 ohm in and 50 ohm BNC out. |
4-way |
LNB |
Internal |
No |
No |
BNC |
50 |
|
2006 |
LNB Service shelf providing DC power, and gain of up to 23 dB (use with attenuator model 2004) allowing passive splitters afterwards. Analogue meters for volatage and current of each LNB. 850 - 2150 MHz operating range. Alarms on LNB current and voltage. Monitor ports on front. |
4-port |
LNB |
Internal |
No |
No |
N-type |
50 |
|
2009 |
4 channel 4-way distribution amplifier (DA), 850 - 2150 MHz operating range, with adjustable gain to 18 dB. LNB Powering on each channel. Monitoring and alarms on voltages, amplifier and LNB currents. RS485 port for alarms. |
4-port |
LNB |
Internal |
No |
No |
N-type |
50 |
|
2711 |
12 port Switch-able LNB Power Supply Unit with analogue meters, and fused outputs: local control only. 3U high 19" shelf. Dual redundant PSU modules. 100W max power |
12-port |
LNB |
Internal |
Yes |
No |
BNC |
50 |
|
2732 |
LNB Power Supply Unit, fused outputs, 3U high 19" shelf. Available connectors are 75 ohm F-type, 50 ohm N-type and 50 ohm BNC. |
16-port |
LNB |
Internal |
No |
Yes |
N/A |
N/A |
|
2738 |
Hot-Swap Matrix Power Supply Unit with voltage meters to power 4 32* 32 matrix modules. 3U high 19" shelf. |
4-port |
Matrix |
N/A |
No |
Yes |
D-type |
N/A |
|
2743 |
12 port LNB Power Supply Unit with 22 KHz tone switching (nd voltage), analogue meters, and fused outputs: local control only - use with 2005 LNB Service Panel. 3U high 19" shelf. Dual redundant PSU modules. 100W max power |
12-port |
LNB |
Internal |
Yes |
No |
BNC |
75 |
|
2745 |
LNB Power Supply Unit, with CURRENT MONITORING & tri state LED's and removable DC Injection modules, fused outputs, 3U high 19" shelf |
16-port |
LNB |
Internal |
No |
Yes |
F-type |
75 |
|
2746 |
LNB Power Supply Unit, SWITCHABLE 13V / 18V, fused outputs, 3U high 19" shelf |
16-port |
LNB |
Internal |
Yes |
No |
F-type |
75 |
|
2753 |
Hot-Swap Matrix Power Supply Unit with voltage meters to power 4 32* 32 matrix modules, to make a 64x64 matrix and also WITH AUXILLARY PORTS TO ALLOW SPLITTERS TO BE POWERED. 3U high 19" shelf. |
4-way |
Matrix |
N/A |
N/A |
Yes |
N/A |
N/A |
|
2755-B7 |
LNB Power Supply Unit, SWITCHABLE 0V/13V / 18V, fused outputs, 3U high 19" shelf |
16-port |
LNB |
Internal |
Yes |
Yes |
BNC |
75 |
|
2756 |
Splitter power supply shelf (3U shelf, hot swap PSU) to power up to 8 splitter / combiner shelves.
The unit is designed to power ETL's -XPSU range of equalised splitters and splitters / combiners in a multi-module matrix system. |
8-port |
Splitter |
N/A |
No |
Yes |
N/A |
N/A |
|
2763 |
LNB Power Supply Unit, SWITCHABLE 0/13/18V and 22KHz tone on/off, 4U high 19'' shelf. |
16-port |
LNB |
Internal |
Yes |
Yes |
BNC |
75 |
|
2767 |
12V power supply for up to four A-GAB L1 3110 line amplifiers (16W, 1.3A, 90-240 VAC, 47-63Hz). |
1-1 |
DC Injection |
N/A |
N/A |
No |
N/A |
N/A |
|
Cost: £49.95
|
|
2769 |
Splitter power supply shelf (3U shelf, hot swap PSU) to power up to 8 splitter / combiner shelves. The unit is designed to power ETL's -XPSU range of equalised splitters and splitters / combiners in a multi-module matrix system. |
8-port |
Splitter |
External |
No |
Yes |
N/A |
N/A |
|
LNB Power Supply Summary |
Fixed & variable voltage, remote & local control (product range summary) |
16-port |
LNB |
Internal |
N/A |
N/A |
N/A |
N/A |
